The VS 3000 is shown adjacent equipped with a fabric tubular filter-sock for the capture of coarse nuisance dust particles; the sock is easily removed for emptying and replacement.
Flexible ducting is available to hire in 8 metre lengths, nominal 300mm (12") diameter.
The fan unit operates from a 110v 32amp supply, and wheels make it easy to relocate around site.
As an alternative to a filtration sock (shown above right) the extractor can be supplied with a high grade multi-pocket bag-filter to capture finer dusts.
A range of filter grades are available to suit the application, all fronted by an EU3/4 panel filter.
For more information about this option>
You can either collect hire equipment from our depots or we can deliver to your location anywhere in the UK.
|
For capture of coarse nuisance dust the VS 1000 extractor is fitted with a fabric filter sock (similar to the VS 3000 but smaller in size). The fabric sock is suplied as a consumable item which can simply be emptied and re-used, or completely replaced within a matter of seconds.
This equipment is compact and portable, is "roll-up, plug-in, switch-on", and requires only a 110v 16amp power supply. Flexible ducting is available to hire in 8 metre lengths, and ducting is nominal 200mm (8") diameter.
You can either collect hire equipment from our depots or we can deliver to your location anywhere in the UK.
|
Some jobs simultaneously generate more than one type of dust hazard, and a mixture of coarse and fine dust may be produced. In such circumstances achieving a satisfactory solution may require the use of multi-stage filtration - progressively filtering to finer levels.
Certain applications may even require the use of negative pressure filtration equipment in conjunction with polythene enclosures, to minimize the outbreak of airborne dust (see adjacent picture).
Envirogard has a wide range of filtration units for this type of application, capable of removing as much as 99.995% of the airborne dust, down to a particle size of 0.3 micron [to put this in perspective - 1 millimetre is 1,000 microns].
You can either collect hire equipment from our depots or we can deliver to your location anywhere in the UK.
|
For many applications it is desirable to duct the air to or from the air-movement equipment. For simple air-movement and non-hazardous dust applications we can provide flexible ducting to hire. The ducting has a wire helix to keep it open in use, and a "cuff" at either end which is simply coupled to another length of ducting or equipment using a coupling band. Standard ducting length is 8 metres. Subject to prior request the ducting can be supplied with metal pigtail hooks along its length if you wish to suspend it above the ground.
You can either collect hire equipment from our depots or we can deliver to your location anywhere in the UK.
|
